Labtop PLC Controlled Walk In Plant Growth Chamber LGC-100WP
LGC-100WP is referred as LABTOP® PLC Controlled Walk-in-Stability Test Chamber.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3" Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Air Circulation Blowers to have uniformity of Temperature under loaded condition.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Lighting Interior illumination for working area.
●Insulation 80mm Thick CFC free PUF Insulated modular cabinet
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Window See through Acrylic Window
●Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Rack and Trays Specially designed adjustable rack and solid stainless steel wire mesh trays ensure even distribution of temperature and humidity
●Power Works on 230/430 V AC single / three phase 50Hz
●Other MCB, Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor 'ON' delay timer to safe guard the compressor.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports
●Capacity 10000 L
●Temperature Range 20° C to 60° C
●Internal Size (WxDxH) cms 200x200x250
●External Size (WxDxH) cms 216x216x266
●Humidity Range 40% RH to 95% RH.
●No. of trays 32
●Inner Chamber Stainless steel 304
●Outer Body Galvanized Iron Pre-Painted
LABTOP
LGC-100WP
1 No./Box
50
₹ 11,60,000.00/ Box
05 Apr, 2023
Labtop PLC Controlled Walk In Plant Growth Chamber LGC-100WGP*
LGC-100WGP is referred as LABTOP® PLC Controlled Walk-in-Stability Test Chamber.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3" Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Air Circulation Blowers to have uniformity of Temperature under loaded condition.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Lighting Interior illumination for working area.
●Insulation 80mm Thick CFC free PUF Insulated modular cabinet
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Window See through Acrylic Window
●Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Rack and Trays Specially designed adjustable rack and solid stainless steel wire mesh trays ensure even distribution of temperature and humidity
●Power Works on 230/430 V AC single / three phase 50Hz
●Other MCB, Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor 'ON' delay timer to safe guard the compressor.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports
●Capacity 10000 L
●Temperature Range 20° C to 60° C
●Internal Size (WxDxH) cms 200x200x250
●External Size (WxDxH) cms 216x216x266
●Humidity Range 40% RH to 95% RH.
●No. of trays 32
●GMP Model
●Inner Chamber Stainless steel 304, 05 mm thick and 80 mm insulation
●Outer Body Stainless steel 304, 05 mm thick and 80 mm insulation
LABTOP
LGC-100WGP*
1 No./Box
50
₹ 11,60,000.00/ Box
05 Apr, 2023
Labtop PLC Controlled Walk In Plant Growth Chamber LGC-120WP
LGC-120WP is referred as LABTOP® PLC Controlled Walk-in-Stability Test Chamber.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3" Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Air Circulation Blowers to have uniformity of Temperature under loaded condition.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Lighting Interior illumination for working area.
●Insulation 80mm Thick CFC free PUF Insulated modular cabinet
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Window See through Acrylic Window
●Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Rack and Trays Specially designed adjustable rack and solid stainless steel wire mesh trays ensure even distribution of temperature and humidity
●Power Works on 230/430 V AC single / three phase 50Hz
●Other MCB, Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor 'ON' delay timer to safe guard the compressor.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports
●Capacity 12000 L
●Temperature Range 20° C to 60° C
●Internal Size (WxDxH) cms 200x250x240
●External Size (WxDxH) cms 216x266x256
●Humidity Range 40% RH to 95% RH.
●No. of trays 48
●Inner Chamber Stainless steel 304
●Outer Body Galvanized Iron Pre-Painted
LABTOP
LGC-120WP
1 No./Box
50
₹ 11,75,000.00/ Box
05 Apr, 2023
Labtop PLC Controlled Walk In Plant Growth Chamber LGC-120WGP*
LGC-120WGP is referred as LABTOP® PLC Controlled Walk-in-Stability Test Chamber.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3" Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Air Circulation Blowers to have uniformity of Temperature under loaded condition.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Lighting Interior illumination for working area.
●Insulation 80mm Thick CFC free PUF Insulated modular cabinet
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Window See through Acrylic Window
●Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Rack and Trays Specially designed adjustable rack and solid stainless steel wire mesh trays ensure even distribution of temperature and humidity
●Power Works on 230/430 V AC single / three phase 50Hz
●Other MCB, Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor 'ON' delay timer to safe guard the compressor.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports
●Capacity 12000 L
●Temperature Range 20° C to 60° C
●Internal Size (WxDxH) cms 200x250x240
●External Size (WxDxH) cms 216x266x256
●Humidity Range 40% RH to 95% RH.
●No. of trays 48
●GMP Model
●Inner Chamber Stainless steel 304, 05 mm thick and 80 mm insulation
●Outer Body Stainless steel 304, 05 mm thick and 80 mm insulation
LGC-800GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 800 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 112x60x120
●External Size (WxDxH) cms 137x92x192
●No. of Doors Double
●No. of trays 8
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-1000P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 1000 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 115x67x130
●External Size (WxDxH) cms 140x99x192
●No. of Doors Double
●No. of trays 8
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LGC-1000GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 1000 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 115x67x130
●External Size (WxDxH) cms 140x99x192
●No. of Doors Double
●No. of trays 8
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-1500P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 1500 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 130x89x130
●External Size (WxDxH) cms 155x121x192
●No. of Doors Double
●No. of trays 8
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LGC-1500GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 1500 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 130x89x130
●External Size (WxDxH) cms 155x121x192
●No. of Doors Double
●No. of trays 8
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 m
LGC-2000GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 2000 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 150x103x130
●External Size (WxDxH) cms 175x135x192
●No. of Doors Double
●No. of trays 8
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-300GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 300 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 56x45x120
●External Size (WxDxH) cms 71x77x189
●No. of Doors single
●No. of trays 4
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-400P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 400 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 63x53x120
●External Size (WxDxH) cms 78x85x189
●No. of Doors single
●No. of trays 4
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coate
LGC-400GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 400 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 63x53x120
●External Size (WxDxH) cms 78x85x189
●No. of Doors single
●No. of trays 4
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-600P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 600 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 72x65x130
●External Size (WxDxH) cms 87x97x192
●No. of Doors single
●No. of trays 4
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LGC-600GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 600 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 72x65x130
●External Size (WxDxH) cms 87x97x192
●No. of Doors single
●No. of trays 4
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-800P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 800 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 112x60x120
●External Size (WxDxH) cms 137x92x192
●No. of Doors Double
●No. of trays 8
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LABTOP
LGC-800P
1 No./Box
50
₹ 4,02,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-1500G*
LGC-1500G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 1500 L
●Internal Size(cm) 130x89x130
●External Size(cm) 155x121x192
●No. pf doors double
●No. of trays 8
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC-1500G*
1 No./Box
50
₹ 5,82,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-2000G*
LGC-2000G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 2000 L
●Internal Size(cm) 150x103x130
●External Size(cm) 175x135x192
●No. pf doors double
●No. of trays 8
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LGC-200P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 200 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 50x40x100
●External Size (WxDxH) cms 65x72x169
●No. of Doors single
●No. of trays 3
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LGC-200GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 200 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 50x40x100
●External Size (WxDxH) cms 65x72x169
●No. of Doors single
●No. of trays 3
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LGC-300P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 300 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 56x45x120
●External Size (WxDxH) cms 71x77x189
●No. of Doors single
●No. of trays 4
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LABTOP
LGC-300P
1 No./Box
50
₹ 2,84,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-200G*
LGC-200G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 200 L
●Internal Size(cm)50x40x100
●External Size(cm)58x72x129
●No. pf doors single
●No. of trays 3
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC-200G*
1 No./Box
50
₹ 2,98,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-300G*
LGC-300G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 300 L
●Internal Size(cm) 56x45x120
●External Size(cm) 71x77x189
●No. pf doors single
●No. of trays 4
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC-300G*
1 No./Box
50
₹ 3,36,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-400G*
LGC-400G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 400 L
●Internal Size(cm) 63x53x120
●External Size(cm) 78x85x189
●No. pf doors single
●No. of trays 4
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC-400G*
1 No./Box
50
₹ 3,45,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-600G*
LGC-600G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 600 L
●Internal Size(cm) 72x65x130
●External Size(cm) 87x97x192
●No. pf doors single
●No. of trays 4
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC-600G*
1 No./Box
50
₹ 4,02,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC- 800G*
LGC-800G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 800 L
●Internal Size(cm) 112x60x120
●External Size(cm) 137x92x192
●No. pf doors double
●No. of trays 8
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC- 800G*
1 No./Box
50
₹ 4,81,000.00/ Box
05 Apr, 2023
Labtop Plant Growth Chamber LGC-1000G*
LGC-1000G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 1000 L
●Internal Size(cm) 115x67x130
●External Size(cm) 140x99x192
●No. pf doors double
●No. of trays 8
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LABTOP
LGC-1000G*
1 No./Box
50
₹ 5,13,000.00/ Box
05 Apr, 2023
Labtop PLC Controlled Laboratory Oven LLO-90P
LLO-90P is referred as LABTOP® PLC Based Laboratory Oven.
Specifications:
●Control System Programmable Logic Control with Safety controller and event managements with 4.3” Colour HMI with touch screen and Ethernet Connectivity
●Memory 1000 Records
●Alarm Audio visual alarm if the temperature deviates from the preset temperature
●Heating System U shaped S.S. Nichrome wire air heaters
●Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
●Insulation 3” Thick CFC free Glass Wool Insulation.
●Trays Specially designed solid stainless steel wire mesh trays ensure even temperature distribution
●Other MCB, Adjustable Tray Height arrangements
●Power Works on 230 V AC single phase 50Hz.
●Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports
●Capacity 90 L
●Temperature Range 5°C above ambient to 300°C
●No. Of. Trays 2
●No. of Doors single
●Internal Size (cms) (WxDxH) 45x45x45
●External Size (cms) (WxDxH) 66x71x100
●Inner chamber Stainless steel 304, 0.8 mm
●Outer body Mild steel,1.0 mm powder coated
