Labtop PLC Controlled Stability Test Chamber LSC-1500P
LABTOP PLC Controlled Stability Test Chamber with capacity of 1500 liters. Inner chamber is made of stainless steel outer body of mild steel duly powder coated, Humidity 40% to 98%, temperature 20 C to 60 C with built in PID controller ( Auto Tune ) with RH Electronic capacitance type Sensor and Digital safety controller.
LGC-2000P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 2000 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 150x103x130
●External Size (WxDxH) cms 175x135x192
●No. of Doors Double
●No. of trays 8
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LABTOP
LGC-2000P
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Walk In Plant Growth Chamber LGC-80WP
LGC-80WP is referred as LABTOP® PLC Controlled Walk-in-Stability Test Chamber.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3" Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Air Circulation Blowers to have uniformity of Temperature under loaded condition.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Lighting Interior illumination for working area.
●Insulation 80mm Thick CFC free PUF Insulated modular cabinet
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Window See through Acrylic Window
●Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Rack and Trays Specially designed adjustable rack and solid stainless steel wire mesh trays ensure even distribution of temperature and humidity
●Power Works on 230/430 V AC single / three phase 50Hz
●Other MCB, Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor 'ON' delay timer to safe guard the compressor.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports
●Capacity 8000 L
●Temperature Range 20° C to 60° C
●Internal Size (WxDxH) cms 200x200x200
●External Size (WxDxH) cms 216x216x216
●Humidity Range 40% RH to 95% RH.
●No. of trays 24
●Inner Chamber Stainless steel 304
●Outer Body Galvanized Iron Pre-Painted
LABTOP
LGC-80WP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Walk In Plant Growth Chamber LGC-80WGP*
LGC-80WGP is referred as LABTOP® PLC Controlled Walk-in-Stability Test Chamber.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3" Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Air Circulation Blowers to have uniformity of Temperature under loaded condition.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Lighting Interior illumination for working area.
●Insulation 80mm Thick CFC free PUF Insulated modular cabinet
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Window See through Acrylic Window
●Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Rack and Trays Specially designed adjustable rack and solid stainless steel wire mesh trays ensure even distribution of temperature and humidity
●Power Works on 230/430 V AC single / three phase 50Hz
●Other MCB, Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor 'ON' delay timer to safe guard the compressor.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports
●Capacity 8000 L
●Temperature Range 20° C to 60° C
●Internal Size (WxDxH) cms 200x200x200
●External Size (WxDxH) cms 216x216x216
●Humidity Range 40% RH to 95% RH.
●No. of trays 24
●GMP Model
●Inner Chamber Stainless steel 304, 05 mm thick and 80 mm insulation
●Outer Body Stainless steel 304, 05 mm thick and 80 mm insulation
LABTOP
LGC-80WGP*
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Stability Test Chamber LSC-1500G*
LABTOP Micro Controller ( P I D)Based Stability test Chamber with capacity of 1500 liters . GMP Model ,Inner and outer chamber is made of stainless steel,Humidity 40% to 98%, temperature 20 C to 60 C with built in micro controlled based temperature indicator cum controller with RH Electronic capacitance type Sensor and Digital safety controller.
LABTOP
LSC-1500G*
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Laboratory Oven LLO-120
LLO-120 is referred as LABTOP® Micro Controller Based Laboratory Oven under Labtop instruments catalogue. These microcontroller based ovens are used in thermal convection applications.
Specifications:
● Control System Micro controller based controller
●Memory 1000 Records
●Alarm Audio visual alarm if the temperature deviates from the preset temperature
●Heating System U shaped S.S. Nichrome wire air heaters
●Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
●Insulation 3” Thick CFC free Glass Wool Insulation.
●Trays Specially designed solid stainless steel wire mesh trays ensure even temperature distribution
●Other MCB, Adjustable Tray Height arrangements
●Power Works on 230 V AC single phase 50Hz.
●Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports
●Capacity 120 L
●Temperature Range 5°C above ambient to 300°C
●No. Of. Trays 3
●No. of Doors single
●Internal Size (cms) (WxDxH) 45x45x60
●External Size (cms) (WxDxH) 66x71x111
●Inner chamber Stainless steel 304, 0.8 mm
●Outer body Mild steel,1.0 mm powder coated
LABTOP
LLO-120
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Laboratory Oven LLO-325GP*
LLO-325GP is referred as LABTOP® PLC Based Laboratory Oven.
Specifications:
●Control System Programmable Logic Control with Safety controller and event managements with 4.3” Colour HMI with touch screen and Ethernet Connectivity
●Memory 1000 Records
●Alarm Audio visual alarm if the temperature deviates from the preset temperature
●Heating System U shaped S.S. Nichrome wire air heaters
●Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
●Insulation 3” Thick CFC free Glass Wool Insulation.
●Trays Specially designed solid stainless steel wire mesh trays ensure even temperature distribution
●Other MCB, Adjustable Tray Height arrangements
●Power Works on 230 V AC single phase 50Hz.
●Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports
●Capacity 120 L
●Temperature Range 5°C above ambient to 300°C
●No. Of. Trays 3
●No. of Doors single
●Internal Size (cms) (WxDxH) 45x45x60
●External Size (cms) (WxDxH) 66x71x111
●Capacity 325 L
●Temperature Range 5°C above ambient to 300°C
●No. Of. Trays 4
●No. of Doors single
●Internal Size (cms) (WxDxH) 60x60x90
●External Size (cms) (WxDxH) 81x89x148
●GMP model
●Inner chamber Stainless steel 304, 0.8 mm
●Outer body Stainless steel,304,1.0 mm dull finish
LABTOP
LLO-325GP*
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Plant Growth Chamber LGC-100G*
LGC-100G is referred as LABTOP Micro controller (PID) based Plant Growth Chamber under Labtop Instruments catalogue. These chambers are used for various industrial applications. These include proper illumination for working area.
Specifications:
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Lighting Interior illumination for working area.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Control System "Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)"
●Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank.
2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Temperature Range 10° C to 60° C
●Photo Effect Fluorescent tubes for day light effect
●Timer 99 Hrs. Programmable Micro Controller Based cyclic Timer for regulating illumination condition
●Capacity 100 L
●Internal Size(cm) 43x40x60
●External Size(cm)58x72x129
●No. pf doors single
●No. of trays 2
●GMP Model
●Inner chamber Stainless steel 316, 0.8 mm
●Outer chamber Stainless steel,1.0 mm
LGC-100P is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 100 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 43x40x60
●External Size (WxDxH) cms 58x72x129
●No. of Doors single
●No. of trays 2
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber mild steel,1.0 mm powder coated
LGC-100GP is referred as LABTOP® PLC Controlled Plant Growth Chamber under Labtop Instruments catalogue. These chambers include two chamber blowers to have uniformity of Temperature under loaded condition and to assure proper air circulation. The chamber is fitted with high quality stainless steel to assure effective usage.
Specifications:
● Control System PLC with PID Controller (Auto tune), Safety controller, auto changeover of Standby systems & other event Managements with 3.8” colour HMI with touch screen, USB printing port and Ethernet connectivity
●Air Circulation "Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)"
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Trays Stainless Steel perforated trays.
●Insulation 3” Thick CFC free PUF Insulation.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Observation Door Inside see through unbreakable acrylic door
●Refrigeration System Hermetically Sealed CFC Free Danfoss/Emerson Compressor with R 134a refrigerant having state of art By pass system for continues run of compressor.
●Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
●Validation Port 50 mm validation Port Hole with silicon rubber seal to insert sensors for validation purpose.
●Power Works on 230 V AC single phase 50Hz
●Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
●Safety Features 1. Float switch to cut-off the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
●Documentations "LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports"
●Capacity 100 L
●Temperature Range 10° C to 60° C
●Photo effect Fluorescent tubes for day light effect
●Internal Size (WxDxH) cms 43x40x60
●External Size (WxDxH) cms 58x72x129
●No. of Doors single
●No. of trays 2
●GMP Model
●Inner Chamber Stainless steel 316, 0.8 mm
●Outer Chamber Stainless steel,1.0 mm
LABTOP
LGC-100GP*
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Orbital Shaking Incubator LSI - 600DR
LSI-600D is referred as LABTOP® Micro controller based Two tier orbital shaking incubator under Labtop Instruments catalogue. Refrigerated version
Specifications:
● Micro-controller based
● Inner Chamber stainless steel 304, 0.8 mm thick
● Outer Chamber mild steel (1.0 mm, thick)
● Temperature Range 5 °C above ambient to 60 °C
● RPM 30 to 350 with Universal Platform
LABTOP
LSI - 600DR
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Orbital Shaking Incubator LSI-300DP
LSI-300DP is referred as LABTOP® PLC controlled Two tier orbital shaking incubator.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3” Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●Inner Chamber Stainless steel 304, 0.8 mm thick
●Outer chamber Mild Steel (1.0mm thick)
●Temperature Range 5 - 60 °C
●RPM 30 to 300 with universal platform
●Capacity 300 L
●Internal Size in cms.(WxDxH) 55x57x78
●External Size in cms (WxDxH) 70x97x148
LABTOP
LSI-300DP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Orbital Shaking Incubator LSI-300GDP
LSI-300GDP is referred as LABTOP® PLC controlled Two tier orbital shaking incubator.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3” Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●GMP model
●Inner Chamber Stainless steel 304, 0.8 mm thick
●Outer chamber Stainless steel 304 (1.0mm thick)
●Temperature Range 5 - 60 °C
●RPM 30 to 300 with universal platform
●Capacity 300 L
●Internal Size in cms.(WxDxH) 55x57x78
●External Size in cms (WxDxH) 70x97x148
LABTOP
LSI-300GDP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Orbital Shaking Incubator LSI-300DRP
LSI-300DRP is referred as LABTOP® PLC controlled Two tier orbital shaking incubator. Refrigerated version.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3” Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●Inner Chamber Stainless steel 304, 0.8 mm thick
●Outer chamber Mild Steel (1.0mm thick)
●Temperature Range 5 - 60 °C
●RPM 30 to 300 with universal platform
●Capacity 300 L
●Internal Size in cms.(WxDxH) 55x57x78
●External Size in cms (WxDxH) 70x97x148
LABTOP
LSI-300DRP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Orbital Shaking Incubator LSI-300GDRP
LSI-300GDRP is referred as LABTOP® PLC controlled Two tier orbital shaking incubator. Refrigeration version.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3” Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
● GMP model
●Inner Chamber Stainless steel 304, 0.8 mm thick
●Outer chamber Stainless steel 304 (1.0mm thick)
●Temperature Range 5 - 60 °C
●RPM 30 to 300 with universal platform
●Capacity 300 L
●Internal Size in cms.(WxDxH) 55x57x78
●External Size in cms (WxDxH) 70x97x148
LABTOP
LSI-300GDRP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Orbital Shaking Incubator LSI - 600DP
LSI-600DP is referred as LABTOP® PLC controlled Two tier orbital shaking incubator.
Specifications:
●Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 4.3” Colour HMI with touch screen and Ethernet connectivity
●Memory 1000 Records
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●Inner Chamber Stainless steel 304, 0.8 mm thick
●Outer chamber Mild Steel (1.0mm thick)
●Temperature Range 5 - 60 °C
●RPM 30 to 250 with universal platform
●Capacity 600 L
●Internal Size in cms.(WxDxH) 125x97x162
●External Size in cms (WxDxH) 125x97x162
LABTOP
LSI - 600DP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Environmental Shaking Incubator LSI-150E
LSI-150E is referred as LABTOP® Micro Controller Based Environmental Orbital Shaking Incubator under Labtop Instruments catalogue. These are fitted with latest control system which is micro controller based temperature indicator cum controller with digital display and PT 100 sensor. the device ensures energy efficiency and longer functional life.
Specifications:
●Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●Temperature Range 10 – 60 °C
●Timer 1-99 hrs.
●Capacity (litters) 150 L
●Speed (rpm) 30-350
●Internal Size cms. (wxdxh) 55x57x45
●External Size cms (wxdxh) 70x97x122
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber Mild steel,1.0 mm powder coated
LABTOP
LSI-150E
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Environmental Shaking Incubator LSI- 300DE
LSI-300DE is referred as LABTOP® Micro Controller Based Two tier Environmental shaking incubator under Labtop Instruments catalogue. These are fitted with latest control system which is micro controller based temperature indicator cum controller with digital display and PT 100 sensor. the device ensures energy efficiency and longer functional life.
Specifications:
●Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●Temperature Range 10 – 60 °C
●Timer 1-99 hrs.
●Capacity (litters) 300 L
●Speed (rpm) 30-300
●Internal Size cms. (wxdxh) 55x57x78
●External Size cms (wxdxh) 70x97x148
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber Mild steel,1.0 mm powder coated
LABTOP
LSI- 300DE
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Environmental Shaking Incubator LSI- 600DE
LSI-600DE is referred as LABTOP® Micro Controller Based Two tier Environmental shaking incubator under Labtop Instruments catalogue. These are fitted with latest control system which is micro controller based temperature indicator cum controller with digital display and PT 100 sensor. the device ensures energy efficiency and longer functional life.
Specifications:
●Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
●Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
●Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
●Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
●Heating System U shaped S.S. Nichrome wire air heaters.
●Insulation 3” Thick CFC free PUF Insulation.
●Lighting Interior illumination for working area.
●Observation Door Inside see through unbreakable acrylic door
●Other MCB and Heavy duty latch with lock & key
●Power Works on 230 V AC single phase 50Hz.
●Certifications ISO 9001: 2008 , ISO 13485 : 2012
●Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports
●Temperature Range 10 – 60 °C
●Timer 1-99 hrs.
●Capacity (litters) 600 L
●Speed (rpm) 30-250
●Internal Size cms. (wxdxh) 115x57x93
●External Size cms (wxdxh) 125x97x162
●Inner Chamber Stainless steel 304, 0.8 mm
●Outer Chamber Mild steel,1.0 mm powder coated
LSI-600DEP is referred as LABTOP® PLC Controlled Two tier Environmental shaking incubator under Labtop Instruments catalogue.
Specifications:
● Programmable Logic Control (PLC)
● Inner Chamber Stainless steel 304,0.8mm thick
● Outer chamber Mild steel (1.0 mm , thick)
● Temperature Range 15 °C to 60 °C
● Capacity 600 L
● RPM 30-250 with universal platform
● RH-40 to 98%
LABTOP
LSI- 600DEP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Orbital Shaker LOS-60D
LOS-60D is referred as LABTOP® Micro Controller Based Orbital Shaker (Double Tier) under Labtop Instruments catalogue.
Specifications:
● Control System Micro controller based speed indicator cum controller with digital display
● Platform Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks
● Auto restart Auto- restart at preset RPM in case of power failure
● Power Works on 230 V AC single phase 50Hz.
● RPM 30 to 250 RPM
● Motor Brushless Induction Motor
● Drive VFD (Variable Frequency Drive) ●Amplitude 50 mm
● Certifications ISO 9001: 2008 and ISO 13485 : 2012
● Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports
● Platform size mm 600x600
● No. of Flasks (ml) 1000mlx12x2, 500x16x2, 250x25x2, 100x36x2
LABTOP
LOS-60D
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Laboratory Oven LLO- 50G*
LABTOP Micro Controller Based laboratory oven.
Inner chamber temperature 5 C above ambient to 300 C with built- in temperature indicator cum controller and motor and blower to have uniformity under loaded condition and stainless steel adjustable tray (304) , Internal Size (W x D x H) : 45 x 45 x 45 cms GMP Model (Inner Outer SS 304).
LABTOP
LLO- 50G*
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Laboratory Oven LLO-90
LLO-90 is referred as LABTOP® Micro Controller Based Laboratory Oven under Labtop instruments catalogue. These microcontroller based ovens are used in thermal convection applications.
Specifications:
●Control System Micro controller based controller
●Memory 1000 Records
●Alarm Audio visual alarm if the temperature deviates from the preset temperature
●Heating System U shaped S.S. Nichrome wire air heaters
●Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
●Insulation 3” Thick CFC free Glass Wool Insulation.
●Trays Specially designed solid stainless steel wire mesh trays ensure even temperature distribution
●Other MCB, Adjustable Tray Height arrangements
●Power Works on 230 V AC single phase 50Hz.
●Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
Password protection Authority level access for controls and separate password at user level
●Certifications ISO 9001: 2008 and ISO 13485 : 2012
●Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports
●Capacity 90 L
●Temperature Range 5°C above ambient to 300°C
●No. Of. Trays 2
●No. of Doors single
●Internal Size (cms) (WxDxH) 45x45x45
●External Size (cms) (WxDxH) 66x71x100
●Inner chamber Stainless steel 304, 0.8 mm
●Outer body Mild steel,1.0 mm powder coated
LABTOP
LLO-90
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop PLC Controlled Walk In Cooling (B.O.D) Incubator LCI-80WP
LCI-80WP is referred as LABTOP® PLC Controlled Walk in Cooling (B.O.D) Incubator under Labtop Instruments catalogue.
Specifications:
● Programmable Logic controller (PLC)
● In-built Microcontroller base temperature indicator cum controller
● Temperature range 5 °C to 60 °C
● Audio Visual Alarm
● Capacity 8000 L
● Inner Chamber Stainless Steel
● Outer Body Galvanized Iron Pre painted
LABTOP
LCI-80WP
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Orbital Shaking Incubator LSI-300D
LSI-300D is referred as LABTOP® Micro controller based Two tier orbital shaking incubator under Labtop Instruments catalogue.
Specifications:
● Micro-controller based
● Inner Chamber stainless steel 304, 0.8 mm thick
● Outer Chamber mild steel (1.0 mm, thick)
● Temperature Range 5 °C above ambient to 60 °C
● RPM 30 to 250 with Universal Platform
LABTOP
LSI-300D
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Orbital Shaking Incubator LSI-300GD
LSI-300GD is referred as LABTOP® Micro controller based Two tier orbital shaking incubator under Labtop Instruments catalogue.
Specifications:
● Micro-controller based
● GMP model
● Inner Chamber stainless steel 304, 0.8 mm thick
● Outer Chamber Stainless steel (1.0 mm, thick)
● Temperature Range 5 °C above ambient to 60 °C
● RPM 30 to 250 with Universal Platform
LABTOP
LSI-300GD
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Orbital Shaking Incubator LSI-300DR
LSI-300DR is referred as LABTOP® Micro controller based Two tier orbital shaking incubator under Labtop Instruments catalogue. Refrigerated Version
Specifications:
● Micro-controller based
● Inner Chamber stainless steel 304, 0.8 mm thick
● Outer Chamber mild steel (1.0 mm, thick)
● Temperature Range 5 °C above ambient to 60 °C
● RPM 30 to 250 with Universal Platform
LABTOP
LSI-300DR
1 No./Box
50
₹ 0.00/ Box
23 Jul, 2022
Labtop Orbital Shaking Incubator LSI-300GDR
LSI-300GDR is referred as LABTOP® Micro controller based Two tier orbital shaking incubator under Labtop Instruments catalogue. Refrigerated version
Specifications:
● Micro-controller based
● GMP model
● Inner Chamber stainless steel 304, 0.8 mm thick
● Outer Chamber Stainless steel (1.0 mm, thick)
● Temperature Range 5 °C above ambient to 60 °C
● RPM 30 to 250 with Universal Platform